Test Box Size 800mm*850mm*600mm 408l Constant Temperature And Humidity Test Chamber

product description:

The constant temperature and humidity test chamber is used to test various performance indexes of electronic products, materials, electricians and instruments under high and low temperature or humid heat environment. This series of constant temperature and humidity test chambers is suitable for the reliability test of various industrial products. It has the

characteristics of temperature control precision and wide control range. The performance index conforms to GB5170.2.3.5.6-95 "Basic parameters verification method for environmental test equipment of electrical and electronic products". Requirements for low temperature, high temperature, constant damp heat, alternating wet heat test equipment.

fulfill the standard:

GB-2423.1-89 (IEC68-2-1) Test A: Low temperature test method.

GB-2423.2-89 (IEC68-2-2) Test B: High temperature test method.

GJB360.8-87 (MIL-STD-202F) high temperature life test.

GBJ150.3 (MIL-STD-810D) high temperature test method.

GJB150.4 (MIL-STD-810D) low temperature test method.

Technical Parameters:

Inner box volume: 408L

Specification model: JD-8001-408

Inner box size: W800×H850×D600mm Outer box size: W1350×H1950×D1280mm

Insulation material: Hard Polurethane foam + glass wool

Temperature and humidity parameters:

1. Temperature range: -40 ° C ~ 150 ° C

2. Temperature fluctuation: ≤0.5°C

3. Temperature uniformity: ≤ ± 2 ° C.

4. Heating time: from normal temperature to 150 ° C for about 40 minutes (non-linear)

5. Cooling time: from normal temperature to -40 ° C for about 65 minutes (non-linear)

6. Humidity range: 20% ~ 95% R.H.

7. Humidity fluctuation: ±1% R.H

8. Humidity uniformity: ±2.0% R.H.

Box door configuration:

1. Single-piece door, left open, handle on the right; product observation window 34×26×4cm three-layer vacuum layer;

2. Embedded non-reaction plane handle; door hinge: SUS#304;

3. The test box has built-in 11W lighting;

4. 2 silicone foam strips;

5. Self-contained electric automatic defogging device.

Technical Parameters:

Main configuration(Refrigeration system / Material name /Quantity):

1. Compressor Taikang (France) 1 set

2. Condenser Fin type with cooling fan (Donghua) 1 set

3. Evaporator Customized 1 set

4. Expansion valve Danfoss/Honeywell (Denmark) 2 sets

5. Solenoid valve Danfoss (Denmark) 2

6. Solenoid valve Saginomiya (Japan) 2

7. Pressure controller Saginomiya (Japan) 1

8. Oil separator ALCO (USA) 1

9. Filter ALCO (United States) 1

10. Refrigerant: R404A Honeywell (USA)

11. Miscellaneous pieces such as copper pipes Taishun (Taiwan) 1 item

12. Measurement and Control System: Material Name Quantity

13. Temperature and humidity control instrument: TEMI580 (Korea) color touch 1

14. Over temperature protection instrument; RKC (Taiwan) 1

15. Temperature sensor; Pt100 2

16. Humidity sensor Pt100 1

17. Contactor Taian (Taiwan) 2

18. Thermal protector Taian (Taiwan) 1

19. Solid state relay ANV (Taiwan) 3

20. Time delay relay ANV (Taiwan) 2

21. Intermediate relay Omron (Taiwan)

22. Heating rod 1 Kw (customized) 2

23. Humidification tube 1Kw (customized) 1 set

24. Switching power supply (leakage protection) Blue (Taiwan) 1 set

25. Terminal block NIM (Japan) 1 item

26. Transformer customization 1

27. R232 communication interface and software for monitoring and data recording (optional 1500.00) 1 set

28. Control switch panel custom 1 item

29. Sound and light alarm Taian (Taiwan) 1 set

30. Heater protection Taide (Taiwan) 1 set

31. Fluorescent lamp ballast OSRAM (Germany) 1 set

                                                              Dongguan Jiedong Test Equipment Co., Ltd.
                                                                      

Business overview:

Dongguan Jiedong Test Equipment Co., Ltd. is located in Tangxia Town, Dongguan City. After years of hard work, Jiedong has established a production base in Dongguan, research and development, sheet metal, production, sales, after-sales, leasing, testing, and governance. With one-stop services such as import and export. The company has always focused on the technology and laboratory solutions of the most reliable reliability environmental testing equipment, and has become the national high-tech enterprise, the executive director unit of China Aerospace Systems Science and Engineering Research Institute, and the governing unit of Dongguan Metrology Association. lSO14001: 2015 environment, lSO9001: 2015 quality system certification. The products are constantly improving, and the customers are in the scientific and technological fields of scientific research, military industry, national defense, colleges, quality inspection, automobile, new energy, battery, optoelectronics, artificial intelligence, precision electronics, power tools, medical, communication, etc. After-sales service, each link takes the customer's point of view and needs as the starting point for thinking, and adheres to the line of excellence and continuous improvement.

Management mechanism:

Jiedong passed and strictly implemented the ISO9001:2008 quality management system, ISO14001-2004 environmental system certification, European CE product certification, OHSAS18001 occupational health and safety management system certification. Carefully implement GB, GJB, IEC, MIL, JB, ZBY and other product standards; Jiedong strictly follows the 7S management method and ERP mechanism, and explores the unique and effective specialization for the environmental test equipment industry's many years of characteristics and experience. The management methods of research, production, sales and service can provide customers with all kinds of ring test products and services with high quality, high efficiency and precision.

Main products:

※  Environmental simulation test equipment: constant temperature and humidity chamber, high and low temperature test chamber, thermal   

     shock test chamber, salt spray test chamber, xenon lamp aging test chamber, rain test Inspection box, ultraviolet aging test chamber, dust     

     test chamber, rain test chamber, high temperature precision oven, simulated transport vibration table, etc.;

※ Battery safety performance testing equipment: battery extrusion testing machine, battery needle testing machine, battery explosion-proof test

    box, battery burning test box, high-altitude low-pressure mode Preliminary test chamber (low pressure test chamber), drop test machine,     

    heavy impact test machine, thermal shock test chamber (heat abuse test chamber), battery needle punching and extrusion Machine, battery

    short-circuit test machine, battery washing test machine, seawater immersion test machine, battery pack reverse test machine, battery safety

    performance comprehensive test laboratory, etc.;

※ Material mechanics testing equipment: electronic tensile testing machine, computerized tensile testing machine, universal testing machine,

    high and low temperature tensile testing machine, four-point compression testing machine,Table type tensile testing machine, horizontal         

     tensile testing machine, etc.;

※  Mobile phone and notebook testing equipment: Click the line test machine, compression test machine, compression life test machine, twist

     test machine, drop test machine, shaft life Life test machine, etc.

※  Wire testing equipment: wire bending (swinging, bending) testing machine, FPC folding test machine, wire bending resistance testing

     machine, taper rocking test machine, line Material elongation (elongation) test machine, etc.;

※  Key detection equipment: button life test machine, switch rotation life test machine, button fatigue life test machine, fully automatic button,     

    switch load strokeLine testing machine, etc.

※ Terminal insertion and removal testing equipment: plug-in life testing machine, insertion force testing machine, fully automatic insertion force

     testing machine, etc.;

※  Abrasion test equipment: anti-friction test machine, ink decolorization test machine, alcohol rubber wear test machine, etc.;

※  Leather and rubber testing equipment: TABER wear tester, Martindale wear tester, low temperature cold resistance tester, leather     

     endurance  tester, color fastnessTesting machine, linear abrasion testing machine, rubber oil resistance testing machine, etc.;

※  Combustion test equipment: vertical horizontal burning test machine, needle flame burning test machine, glow wire test machine, automobile

     interior material burning test machine, large-scale combustion Cabinet, leakage tracking test machine, etc.;

※  Other testing equipment: lithium battery moisture measuring instrument, falling ball impact testing machine, shotgun impact testing machine,

     etc.;

Application areas:

Dongguan Jiedong Test Equipment Co., Ltd. has excellent research and development products, advanced equipment and complete testing means. The company has first-class technical talents and management talents, which makes the company's products always in a good position in the same industry. Dongguan Headquarters Factory is located in Dongguan City, which is known as the world factory with convenient transportation and developed manufacturing industry. Our products are widely used in scientific research, military, electronics, electrician, LED, automotive, plastic, hardware, toys, paper products, chemicals, household goods and other industries, and are applicable to various research units, quality inspection organizations, academic discussions and other fields. To provide customers with a variety of testing and testing equipment in line with national standards and related industry standards, international standards (GB, GJB, IEC, MIL, DIN), to achieve international quality, localized prices.

Phone: 86-0769-26265799

Address: No. 17, Sanheng Road, Lianhu South, Tangxia Town, Dongguan City, China