Precision 0.1mm Stainless Steel Box Car Interior Material Burning Test Box

Automotive interior material burning test machine JD-3053

Applicable industry:

This combustion test device is suitable for identifying the horizontal combustion characteristics of interior materials of automobiles (cars, multi-purpose passenger cars, trucks and buses).

Applicable standards:

Meet the requirements of GB8410-2006, TL1010, GM6090M, DIN7520, GM9070P, MVSS302, GMW3232, GS97038.

Test method:

The sample was horizontally held on a U-shaped bracket and ignited by a small flame for 15 s in a combustion chamber, and the flame was ignited at the free end of the sample. Record whether the flame is extinguished or when it is extinguished; and the distance the sample burns and the time it takes to burn the distance.

Data reading: burning time, afterflame time, burning distance

Test result: Burning speed V (mm/min) converted by the following formula: V=60 X(L / T), in the mode: L—burning distance mm; T—time s used for burning distance L test results

Instrument composition:

1. Combustion system: anti-corrosion combustion box, inner diameter 9.5mm gas lamp nozzle; ignition automatic control system, intake and exhaust system.

2, timing system: burning timer, afterflame timer.

3. Test fixture: It consists of two U-shaped corrosion-resistant metal plates. One of the brackets is provided with a heat-resistant metal wire diameter of 0.25 mm and a support line with a distance of 25 mm.

4. Glass observation window: The front part of the combustion box is provided with a heat-resistant glass observation window, which can easily observe the change of burning speed during combustion.

5. Stainless steel box: There are 10 venting holes with a diameter of 19mm at the bottom of the combustion box. The four walls are close to the top with a 13mm wide ventilation slot. The entire combustion chamber is supported by four legs 10 mm high. A small hole for inserting a thermometer is arranged at the top of the combustion box, and the hole is arranged at the center of the top and the back, and the center is 20 mm from the inner side of the rear panel.

Technical Parameters:

1. Burning box metal cover (studio size: length X width X height): 385X204X360mm

2, the bottom ventilation hole spacing: horizontal 63.5mm, vertical: 127mm,

3, the bottom ventilation hole: the number of 10, the diameter of 19mm

4, ventilation slot: 360X13mm

5, bottom feet: 10mm

6. Gas lamp nozzle inner diameter: 9.5mm

7, burning flame: 38mm

8. The center of the nozzle mouth is below the center of the free end of the sample: 19mm

9. The bottom of the sample is above the bottom of the combustion box: 178mm

10. The front end of the sample holder is away from the inner surface of the combustion box: 22mm

11. Distance between the longitudinal side of the test bracket and the inner surface of the combustion box: 50mm

12, the first branch of the test stand from the front end: 38mm

13. The second branch of the test support is from the first pivot point: 100mm

14. The third branch of the test support is from the second pivot point: 254mm

15. Heat resistant wire diameter: 0.25mm

16, heat-resistant wire spacing: 25mm

17. The length of the metal comb is greater than: 110mm, and there are 7~8 optical scallops per 25mm.

18, collection tray:: 336X85mm

19, timer setting: 15S (0~99.99/S/M/H can be set)

20, thermometer: MAX: 150 ° C

21, steel ruler: accuracy: 0.1mm

22, gas: liquefied gas (self-provided)

23, power supply voltage: 220V/50Hz

                                                              Dongguan Jiedong Test Equipment Co., Ltd.
                                                                      

Business overview:

Dongguan Jiedong Test Equipment Co., Ltd. is located in Tangxia Town, Dongguan City. After years of hard work, Jiedong has established a production base in Dongguan, research and development, sheet metal, production, sales, after-sales, leasing, testing, and governance. With one-stop services such as import and export. The company has always focused on the technology and laboratory solutions of the most reliable reliability environmental testing equipment, and has become the national high-tech enterprise, the executive director unit of China Aerospace Systems Science and Engineering Research Institute, and the governing unit of Dongguan Metrology Association. lSO14001: 2015 environment, lSO9001: 2015 quality system certification. The products are constantly improving, and the customers are in the scientific and technological fields of scientific research, military industry, national defense, colleges, quality inspection, automobile, new energy, battery, optoelectronics, artificial intelligence, precision electronics, power tools, medical, communication, etc. After-sales service, each link takes the customer's point of view and needs as the starting point for thinking, and adheres to the line of excellence and continuous improvement.

Management mechanism:

Jiedong passed and strictly implemented the ISO9001:2008 quality management system, ISO14001-2004 environmental system certification, European CE product certification, OHSAS18001 occupational health and safety management system certification. Carefully implement GB, GJB, IEC, MIL, JB, ZBY and other product standards; Jiedong strictly follows the 7S management method and ERP mechanism, and explores the unique and effective specialization for the environmental test equipment industry's many years of characteristics and experience. The management methods of research, production, sales and service can provide customers with all kinds of ring test products and services with high quality, high efficiency and precision.

Main products:

※  Environmental simulation test equipment: constant temperature and humidity chamber, high and low temperature test chamber, thermal   

     shock test chamber, salt spray test chamber, xenon lamp aging test chamber, rain test Inspection box, ultraviolet aging test chamber, dust     

     test chamber, rain test chamber, high temperature precision oven, simulated transport vibration table, etc.;

※ Battery safety performance testing equipment: battery extrusion testing machine, battery needle testing machine, battery explosion-proof test

    box, battery burning test box, high-altitude low-pressure mode Preliminary test chamber (low pressure test chamber), drop test machine,     

    heavy impact test machine, thermal shock test chamber (heat abuse test chamber), battery needle punching and extrusion Machine, battery

    short-circuit test machine, battery washing test machine, seawater immersion test machine, battery pack reverse test machine, battery safety

    performance comprehensive test laboratory, etc.;

※ Material mechanics testing equipment: electronic tensile testing machine, computerized tensile testing machine, universal testing machine,

    high and low temperature tensile testing machine, four-point compression testing machine,Table type tensile testing machine, horizontal         

     tensile testing machine, etc.;

※  Mobile phone and notebook testing equipment: Click the line test machine, compression test machine, compression life test machine, twist

     test machine, drop test machine, shaft life Life test machine, etc.

※  Wire testing equipment: wire bending (swinging, bending) testing machine, FPC folding test machine, wire bending resistance testing

     machine, taper rocking test machine, line Material elongation (elongation) test machine, etc.;

※  Key detection equipment: button life test machine, switch rotation life test machine, button fatigue life test machine, fully automatic button,     

    switch load strokeLine testing machine, etc.

※ Terminal insertion and removal testing equipment: plug-in life testing machine, insertion force testing machine, fully automatic insertion force

     testing machine, etc.;

※  Abrasion test equipment: anti-friction test machine, ink decolorization test machine, alcohol rubber wear test machine, etc.;

※  Leather and rubber testing equipment: TABER wear tester, Martindale wear tester, low temperature cold resistance tester, leather     

     endurance  tester, color fastnessTesting machine, linear abrasion testing machine, rubber oil resistance testing machine, etc.;

※  Combustion test equipment: vertical horizontal burning test machine, needle flame burning test machine, glow wire test machine, automobile

     interior material burning test machine, large-scale combustion Cabinet, leakage tracking test machine, etc.;

※  Other testing equipment: lithium battery moisture measuring instrument, falling ball impact testing machine, shotgun impact testing machine,

     etc.;

Application areas:

Dongguan Jiedong Test Equipment Co., Ltd. has excellent research and development products, advanced equipment and complete testing means. The company has first-class technical talents and management talents, which makes the company's products always in a good position in the same industry. Dongguan Headquarters Factory is located in Dongguan City, which is known as the world factory with convenient transportation and developed manufacturing industry. Our products are widely used in scientific research, military, electronics, electrician, LED, automotive, plastic, hardware, toys, paper products, chemicals, household goods and other industries, and are applicable to various research units, quality inspection organizations, academic discussions and other fields. To provide customers with a variety of testing and testing equipment in line with national standards and related industry standards, international standards (GB, GJB, IEC, MIL, DIN), to achieve international quality, localized prices.

Phone: 86-0769-26265799

Address: No. 17, Sanheng Road, Lianhu South, Tangxia Town, Dongguan City, China