Separate Vertical Control Box Drop Test Machine Double-arm Drop Test Machine

Arm drop test machine JD-6001B

First, the product uses:

The double-arm drop tester is mainly used to assess the degree of impact of the package on the actual transportation, loading and unloading process, and to assess the impact strength and packaging design of the package during handling.

Second, meet the design criteria:

The falling test of the two arms meets the national standards of GB4757.5-84 JISZ0202-87 ISO2248-1972(E).

Third, the main technical parameters:

◆Drop height: 400-1500mm

◆Maximum weight of test piece: 80kg

◆ Height display mode: LED digital

◆Drop floor thickness: 10mm

◆Drop mode: electric

◆Reset mode: manual

◆Test product clamping method: diamond, angle, surface

◆Body size; 700*350mm

◆Backplane size: 1400*1200*10mm

◆Maximum size of test piece: 1000*800*1000

◆ Test bench dimensions: 1400-1200-2300mm;

◆ Drop error: ±10mm;

◆ Drop plane error <1°

◆ High display using high precision encoder

◆ Control box: Separate vertical control box, using anti-static powder spray paint.

◆ Net weight: 300kg

◆ Motor power: 0.75KW

◆ Power supply: 380V, 1.5KW

Fourth, equipment operating specifications:

1. Turn on the power switch and the power light is on. (At this time, it is strictly forbidden for personnel without professional training to enter the yellow warning line to do any relevant test operation. It is very dangerous), check whether the two wings are in the horizontal position, otherwise the hand plate is in the horizontal position;

2. Place the test specimen on the two wings and fix it with a clamp; everyone stands outside the safety line.

3. Press the up button to raise the two wings to the required test height, and press the stop button to stop the rise;

4. Press the falling key, the test item is free to fall, the test is completed, and the sample condition after the drop test is recorded;

5. Test the other products according to the above 2~4 test methods, and perform the free drop test according to the required surface, angle and edge.

6. Remarks: It is strictly forbidden to stand on the workbench during the drop test! (Danger)

Five, matters needing attention and maintenance:

1. The test machine casing must be grounded reliably, otherwise there is danger of electric shock;

2. The power inlet end should be connected with air switch and contactor with leakage protection above the same capacity, so that the power can be cut off immediately in case of emergency;

3. When the machine is running, do not touch the part other than the control panel with your hand to prevent scratches or crushing;

4. If you need to move the machine, be sure to cool it for 5 minutes after turning off the power.

5. After the new machine is installed in the factory, it is necessary to add appropriate low-concentration oil to the sliding round rod. It is strictly forbidden to add anti-rust oil or high-concentration oil and backlog with corrosive oil.

6. If there is too much dust in the oiling station for a long time, please lower the machine to the lower part, wipe the previous oil and re-oil it; regularly add lubricating oil to the transmission parts of the machine;

7. The drop machine is an impact mechanical device. When the new machine is used more than 500 times, each screw must be tightened to avoid malfunction.

Sixth, machine studio environment requirements:

Temperature: 5 ° C ~ +28 ° C [1] (average temperature within 24 hours ≤ 28 ° C)

Relative humidity: ≤85% RH

Power supply conditions Three-phase four-wire + protective ground wire,

Voltage range: AC (380 ± 38) V

Seven, the main components configuration list:

                                                              Dongguan Jiedong Test Equipment Co., Ltd.
                                                                      

Business overview:

Dongguan Jiedong Test Equipment Co., Ltd. is located in Tangxia Town, Dongguan City. After years of hard work, Jiedong has established a production base in Dongguan, research and development, sheet metal, production, sales, after-sales, leasing, testing, and governance. With one-stop services such as import and export. The company has always focused on the technology and laboratory solutions of the most reliable reliability environmental testing equipment, and has become the national high-tech enterprise, the executive director unit of China Aerospace Systems Science and Engineering Research Institute, and the governing unit of Dongguan Metrology Association. lSO14001: 2015 environment, lSO9001: 2015 quality system certification. The products are constantly improving, and the customers are in the scientific and technological fields of scientific research, military industry, national defense, colleges, quality inspection, automobile, new energy, battery, optoelectronics, artificial intelligence, precision electronics, power tools, medical, communication, etc. After-sales service, each link takes the customer's point of view and needs as the starting point for thinking, and adheres to the line of excellence and continuous improvement.

Management mechanism:

Jiedong passed and strictly implemented the ISO9001:2008 quality management system, ISO14001-2004 environmental system certification, European CE product certification, OHSAS18001 occupational health and safety management system certification. Carefully implement GB, GJB, IEC, MIL, JB, ZBY and other product standards; Jiedong strictly follows the 7S management method and ERP mechanism, and explores the unique and effective specialization for the environmental test equipment industry's many years of characteristics and experience. The management methods of research, production, sales and service can provide customers with all kinds of ring test products and services with high quality, high efficiency and precision.

Main products:

※  Environmental simulation test equipment: constant temperature and humidity chamber, high and low temperature test chamber, thermal   

     shock test chamber, salt spray test chamber, xenon lamp aging test chamber, rain test Inspection box, ultraviolet aging test chamber, dust     

     test chamber, rain test chamber, high temperature precision oven, simulated transport vibration table, etc.;

※ Battery safety performance testing equipment: battery extrusion testing machine, battery needle testing machine, battery explosion-proof test

    box, battery burning test box, high-altitude low-pressure mode Preliminary test chamber (low pressure test chamber), drop test machine,     

    heavy impact test machine, thermal shock test chamber (heat abuse test chamber), battery needle punching and extrusion Machine, battery

    short-circuit test machine, battery washing test machine, seawater immersion test machine, battery pack reverse test machine, battery safety

    performance comprehensive test laboratory, etc.;

※ Material mechanics testing equipment: electronic tensile testing machine, computerized tensile testing machine, universal testing machine,

    high and low temperature tensile testing machine, four-point compression testing machine,Table type tensile testing machine, horizontal         

     tensile testing machine, etc.;

※  Mobile phone and notebook testing equipment: Click the line test machine, compression test machine, compression life test machine, twist

     test machine, drop test machine, shaft life Life test machine, etc.

※  Wire testing equipment: wire bending (swinging, bending) testing machine, FPC folding test machine, wire bending resistance testing

     machine, taper rocking test machine, line Material elongation (elongation) test machine, etc.;

※  Key detection equipment: button life test machine, switch rotation life test machine, button fatigue life test machine, fully automatic button,     

    switch load strokeLine testing machine, etc.

※ Terminal insertion and removal testing equipment: plug-in life testing machine, insertion force testing machine, fully automatic insertion force

     testing machine, etc.;

※  Abrasion test equipment: anti-friction test machine, ink decolorization test machine, alcohol rubber wear test machine, etc.;

※  Leather and rubber testing equipment: TABER wear tester, Martindale wear tester, low temperature cold resistance tester, leather     

     endurance  tester, color fastnessTesting machine, linear abrasion testing machine, rubber oil resistance testing machine, etc.;

※  Combustion test equipment: vertical horizontal burning test machine, needle flame burning test machine, glow wire test machine, automobile

     interior material burning test machine, large-scale combustion Cabinet, leakage tracking test machine, etc.;

※  Other testing equipment: lithium battery moisture measuring instrument, falling ball impact testing machine, shotgun impact testing machine,

     etc.;

Application areas:

Dongguan Jiedong Test Equipment Co., Ltd. has excellent research and development products, advanced equipment and complete testing means. The company has first-class technical talents and management talents, which makes the company's products always in a good position in the same industry. Dongguan Headquarters Factory is located in Dongguan City, which is known as the world factory with convenient transportation and developed manufacturing industry. Our products are widely used in scientific research, military, electronics, electrician, LED, automotive, plastic, hardware, toys, paper products, chemicals, household goods and other industries, and are applicable to various research units, quality inspection organizations, academic discussions and other fields. To provide customers with a variety of testing and testing equipment in line with national standards and related industry standards, international standards (GB, GJB, IEC, MIL, DIN), to achieve international quality, localized prices.

Phone: 86-0769-26265799

Address: No. 17, Sanheng Road, Lianhu South, Tangxia Town, Dongguan City, China